Recently, I bought cheap infrared temperature sensor, GY-906 from aliexpress, only about $5 including shipping fee. Adafruit MLX90614 library can be used for this module. https://github.com/adafruit/Adafruit-MLX90614-Library Communication via I2C and address is 0x5A. I thought using device is simple as other sensor device; but didn’t work as expected, returning fixed value, 1037.55. After searching through forum, found out that changing I2C frequency to 50000 makes this thing work. I can set frequency at Wire.begin if this is only device I’m using, but once I try to use OLED to show readout, OLED works but sensor stops working again. Finally, I was able to make both OLED and sensor to work …